Asko CC4840S - Display and Speed Controls; Timer and Intensive Speed

- 7 -
If the OFF button is pressed for at least 2 seconds, regardless from the selected motor speed, the hood will
switch o.
OFF
Button C = Display
The display can alternate GREEN LEDs which indicate the motor speed, with RED LEDs which indicate the
alarm status (See special functions).
speed 1
speed 2
speed 3
speed 4
Button D = ON and Speed Increase
Starting:
In order to turn on the hood press button ON.
Adjustment:
A brief pressure of the ON button will increase the speed of the motor a step at a time.
1-
2-
3-
4-
INTENSIVE speed function:
If the ON button is kept pressed for about 2 seconds, the INTENSIVE speed function is activated for 10 minutes;
after this time, the previously set speed will be restored.
When the function is active LED 4 will ash
If you want to interrupt it before the 10 minutes have expired press the button again.
Button E = Timer
Operation:
The Timer button times the aspiration speed of the hood when it is activated for 10 MINUTES. After this time
has elapsed the appliance will switch o.