12
Customer Care Center
1-800-898-1879
www.askousa.com
Press start
The dishwasher will now start. It man-
ages the entire wash automatically.
Ensure that the door is properly closed or
the machine will not start.
Changing program
If you want to change program after having
started the machine, press the Start/Stop
button for three seconds. Then select a new
program and press the Start/Stop button.
Make sure there is detergent in the dispens-
er.
Do you want to load more dishes?
Carefully open the door; the machine will
stops automatically, put in the dishes, close
the door and the dishwasher will continue
from where it left o.
If the machine is switched o at the
main switch
(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when the
power comes back on.
Note!
If the power is switched o, or if the door
is open during drying, the program is inter-
rupted.
Standby mode
Once the machine has nished, it only
draws standby current. Should you wish
to disconnect the power completely, just
switch o at the main power switch. Turn o
the water faucet if the machine is not to be
used for an extended period, such as during
vacations, for example.
To Next Page
Loading...
Need help?
General
