Asko D5534 User Manual (English)

Other manuals for Asko D5534

Operating Instructions32 pages

Mode D'Emploi36 pages

Questions and Answers:

M
mjohnsonAug 16, 2025
Why does my Asko Dishwasher not start?
- O
  ortegadanielAug 16, 2025
  If your Asko dishwasher isn't starting, ensure the main power switch is on by pressing and holding it until the display lights up. Also, check that the door is properly closed, the plug is securely in the power outlet, and the water supply valve is open. Verify that a fuse or circuit breaker hasn't tripped and that the Delayed start option isn't selected (press and hold Start/Stop for three seconds to cancel). Finally, check for any overflow/leaks. If a whirring sound is present and doesn't stop when the power is off, turn off the water supply valve.
B
Bonnie CunninghamAug 19, 2025
How to fix Asko D5534 that is not cleaning dishes properly?
- N
  nicholas67Sep 12, 2025
  If your Asko dishwasher isn't cleaning dishes well, start by checking the spray arms; remove and clean them to ensure they rotate freely, and make sure dishes aren't blocking their movement. Verify you're using fresh detergent and the correct dosage based on your water hardness. Select a more powerful program or higher temperature if the current setting is too weak. Ensure dishes are loaded correctly, avoiding overcrowding or blocking with large items, and that the filter is firmly screwed into place. Secure glasses and cups to prevent them from toppling during the wash.
J
Jose SmithAug 22, 2025
Why does water remain in my Asko Dishwasher above the filters?
- B
  Brett RobinsonAug 22, 2025
  If your Asko dishwasher leaves water above the filters, check for a blocked or kinked drain hose; loosen the hose to clear any blockages and ensure it's free from kinks. Also, clean the coarse and fine filters, and inspect the drain pump for any debris, cleaning it as necessary.
T
Timothy LiuAug 25, 2025
What to do if Asko Dishwasher leaves a sticky white/blue film on dishes?
- M
  Monica NguyenAug 26, 2025
  If your Asko dishwasher leaves a sticky white or blue film on dishes, the rinse aid dosage setting is likely too high. Reduce the amount of rinse aid being dispensed.
A
Andre SmithAug 28, 2025
How to improve drying in my Asko D5534 Dishwasher?
- K
  Kristen GreenAug 28, 2025
  If your Asko dishwasher isn't drying dishes well enough, try activating the Long dry option. Ensure the dishwasher is fully loaded for optimal drying. Check and top up the rinse aid if needed, or increase the rinse aid dosage. You can also open the door slightly once the program has finished to aid drying.
M
Mr. Joe ChaneyAug 31, 2025
How to remove spots left after washing in Asko D5534?
- T
  trileyAug 31, 2025
  If your Asko dishwasher leaves spots after washing, especially from lipstick or tea, try using a detergent with a bleaching agent to help remove these stubborn stains.
H
hardingbonnieSep 3, 2025
How to get rid of bad odor in Asko D5534 Dishwasher?
- C
  Charles WilsonSep 3, 2025
  To address a bad odor in your Asko dishwasher, clean around the seals and corners with a dish brush and a low-foaming cleaner. Additionally, if you frequently use low-temperature programs, run a program at a higher temperature about once a month to help eliminate odors.
J
Justin HillSep 6, 2025
Why I cannot close the door of my Asko Dishwasher?
- M
  Megan RodriguezSep 6, 2025
  If your Asko dishwasher door won't close, check that the baskets are correctly positioned horizontally and that dishes aren't blocking the baskets from sliding properly into place.
P
Peter WoodSep 9, 2025
Why is my Asko D5534 making a rattling sound?
- E
  Elizabeth LaraSep 9, 2025
  If your Asko dishwasher is making a rattling sound, make sure the dishes are placed securely and that the spray arms can rotate freely.
K
Kimberly Gomez DVMSep 12, 2025
What to do if touch buttons on Asko Dishwasher do not react?
- M
  Michael ReynoldsSep 12, 2025
  If the touch buttons on your Asko dishwasher aren't responding, wait a moment after opening the door before pressing them again. Clean the buttons with a dry or slightly damp cloth to remove any dirt. If a specific symbol appears on the display, ensure the door is opened wide enough until the display lights up. Also, check if the child lock (button lock) is activated; refer to the Settings section for deactivation instructions.