ActionPossible causesProblem
Press until the display
shows "Program started, close
door in 4 sec".
has not been pressed.
The dishwasher does not start.
Close the door within four
seconds, otherwise the
dishwasher will not start.
The door is not closed properly
or was not closed immediately
after you pressed .
If you want the dishwashing
program to continue, press
and close the door within four
seconds.
You have opened the
dishwasher to add more dishes
while a program is in progress.
Check the door lock. If it has not
clicked into place and locked,
open the door.
The door lock has not clicked
into place and locked.
Press and hold and
until the display starts flashing.
Wait until it stops flashing (60
seconds). Close the door.
Check that the door lock clicks
into place and locks and that the
dishwasher starts.
Press and hold for three
seconds if you want to cancel
the Delayed start option.
Check whether the Delayed start
option has been selected.
Check.The plug is not plugged into the
power outlet.
Check.A fuse/circuit breaker has been
tripped.
36
Troubleshooting
To Next Page
Loading...
Need help?
General
