Asko DFI444B/1 User Manual (English)

Joshua GrayAug 19, 2025

Why won't my Asko Dishwasher start?

S
Sarah HillAug 19, 2025
If your Asko dishwasher isn't starting, make sure you press and hold the Start/Stop button until the display reads 'Program started'. Also, check that the door is properly closed and that the door lock has clicked into place. Other things to verify include the fuse/circuit breaker, the plug in the wall socket, and the water tap. Ensure there are no overflows or leaks. If a whirring sound persists even when the power is off, turn off the water tap, pull out the plug, and contact customer support. If the Delayed Start option is enabled, press and hold Start/Stop for three seconds to cancel it.

Asko DFI444B/1 Specifications

General

Door color	Not applicable
Cord length	1.825 m
Control type	Buttons
Display type	LCD
Product size	Full size (60 cm)
Tub material	Stainless steel
Built-in display	Yes
Inlet hose length	1.63 m
Number of baskets	3 basket(s)
Custom panel-ready	-
Outlet hose length	2 m
Appliance placement	Fully built-in
Cycle time	205 min
Noise level	42 dB
Dishwashing programs	Auto, Eco, Hygiene, Intensive, Pre-rinse, Quick
Number of place settings	14 place settings
Number of washing programs	7
Maximum water flow pressure	1000 kPa
Minimum water flow pressure	30 kPa
Current	10 A
Connected load	1900 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9 L
Energy consumption per cycle	0.74 kWh
Package depth	680 mm
Package width	640 mm
Package height	890 mm
Package weight	46800 g

Weight and Dimensions

Depth	559 mm
Width	596 mm
Height	819 mm
Weight	43500 g
Depth with door open	1198 mm
Installation compartment depth	560 mm
Installation compartment width	600 mm
Installation compartment height (min)	820 mm

Asko DFI444B/1 User Manual