Why Asko DFI644B buttons do not react when pressed?
If the buttons on your Asko Dishwasher aren't responding, consider these possibilities: * Wait a moment before pressing the buttons after opening the door. * Check if the child lock (button lock) is activated. * Ensure the door is open, as the buttons only work when the door is open. * Clean the buttons with a dry or slightly damp cloth.
How to fix Asko DFI644B when dishes are not clean?
If your dishes aren't getting clean in your Asko Dishwasher, consider the following: * Make sure dishes aren't blocking the spray arms. * Clean the spray arms, check the care and cleaning chapter for instructions. * Select a longer wash cycle. * Adjust your detergent dosage based on water hardness; too much or too little can affect cleaning. * Ensure your detergent isn't old. * Load dishes correctly, avoiding overcrowding or blocking. * Secure glasses and cups to prevent them from toppling. * Verify that the filters are correctly fitted and locked.
What to do if Asko Dishwasher is not drying dishes properly?
If your dishes aren't drying properly in your Asko Dishwasher, here's what you can do: * Activate the Extra Dry option. * Ensure the dishwasher is fully loaded. * Check and replenish rinse aid levels, or increase the dosage. * If using all-in-one detergents with the TAB setting activated, consider switching detergents or deactivating the TAB setting and using separate salt and rinse aid. * Try opening the door slightly after the program finishes.
How to fix Asko DFI644B when water remains inside?
If water is remaining in your Asko Dishwasher, try these steps: * Clean the coarse and fine filters. * Ensure the filters are correctly fitted and locked in position. * Clean any debris from the drainage pump. * Verify the coloured stop on the right in the bottom drain is in place. * Check the drainage hose for kinks or sharp bends. * Disconnect the drainage hose from the sink unit's water trap and clear any blockages, ensuring the connection has an inner diameter of at least 14 mm.
Why does my Asko DFI644B leave spots on dishes?
If you're seeing spots or films on dishes from your Asko Dishwasher, here are some things to check: * Adjust the rinse aid dosage setting. * If using all-in-one detergent with the TAB setting activated, switch detergents or deactivate the TAB setting and use salt and separate rinse aid. * Make sure the salt compartment is full. * Verify the water softener setting is correct. * Ensure the salt compartment lid is tightly closed to prevent leaks; otherwise, contact service. * For crystal, use lower temperatures and less detergent to prevent etching; consult the detergent manufacturer.
Why is my Asko DFI644B Dishwasher not starting?
Your Asko Dishwasher might not start due to several reasons: * The Start/Stop button may not have been pressed long enough; press and hold it until the display indicates the program has started. * The door might not be properly closed; ensure it is securely shut. * A fuse or circuit breaker may have tripped; check your electrical panel. * The dishwasher's plug may not be properly inserted into the wall socket; verify the connection. * The water tap might be turned off; ensure the water supply is on. * There may be an overflow or leak; inspect the dishwasher for any signs of water leakage. * If you hear a whirring sound from the drainage pump that doesn't stop, turn off the water tap, pull out the plug, and call the service department. * If you want to cancel the Delayed St...
What to do if I cannot close the door of my Asko DFI644B?
If you're having trouble closing the dishwasher door: * Make sure the baskets are correctly positioned horizontally. * Check that the dishes are not preventing the baskets from sliding properly into place.
Why the buttons on my Asko DFI644B Dishwasher do not react?
If the buttons on your Asko Dishwasher aren't responding: * Wait a moment and try again, as you may have pressed them too soon after opening the door. * Check if the child lock (button lock) is activated. * Ensure the door is open, as the buttons only work when the door is open. * Clean the buttons with a dry or slightly damp cloth if they are dirty.
What to do if water remains in my Asko Dishwasher?
If water remains in your dishwasher, try the following: * Clean the coarse and fine filters. * Ensure the filter handle is locked in the stop position. * Clean any debris from the drainage pump. * Verify the colored stop on the right in the bottom drain is in place. * Check the drainage hose for kinks and sharp bends. * Disconnect the drainage hose from the sink unit's water trap to check for blockages, ensuring the connection has an inner diameter of at least 14 mm.
What to do if the dishes are not clean in my Asko DFI644B?
If your dishes aren't coming out clean, here are a few things to check: * Make sure the spray arms can rotate freely and are not blocked by dishes. * Clean the spray arms if the holes or bearings are blocked. * Select a longer, more intensive dishwashing program. * Adjust the detergent dosage according to your water hardness; too much or too little detergent can affect cleaning. * Ensure your detergent is not old, as detergents can expire. * Load dishes correctly, avoiding covering porcelain with large bowls or placing tall glasses in corners. * Secure dishes to prevent them from toppling over during the wash. * Verify that the filters are correctly fitted and locked in position. * Check that the colored stop on the right in the bottom drain is in place.
General| Brand | Asko |
|---|---|
| Model | DFI644B |
| Category | Dishwasher |
| Language | English |
To Next Page
