14
Press Start/Stop
The dishwasher will now start. It manages the
entire wash automatically. Ensure that the door
is properly closed or the machine will not start.
Changing program
If you want to change program after having
started the machine, press the Start/Stop button
for three seconds. Then select a new program
and then press the Start/Stop button again.
Do you want to load more dishes?
Carefully open the door; the machine will stops
automatically, put in the dishes, close the door
and the dishwasher will continue from where it
left o.
If the machine is switched o from
the main switch
(or in the event of a power cut) before the
washing program has been completed, the
interrupted program will continue when power
comes back on.
NB!
If the power is switched o, or if the door is
open for more than 2 minutes during drying, the
program isinterrupted.
After dishwashing
Once the machine has nished, it only draws
standby current. Turn o the water faucet if
the machine is not to be used for an extended
period, such as during vacations, for example.
Drying
For additional drying the door should be opened
35 mm upon completion of the drying cycle.
For more information refer to the page marked
Performance Information in these instructions.
Basic Course
To Next Page
Loading...
