20
SETTINGSSETTINGS
SETTINGSSETTINGS
SETTINGS
4.2 Time display
DW20.2, DW20.4, DW20.5, DW20.C: For
programme selection, the display shows the time
taken by the programme on the previous
occasion. After starting the programme, the time
is counted down in stages of one minute (no
conversion while the programme is running). A
new time is not stored if a fault has occurred
while the programme is running.
DW20.2, DW20.3: The start lamp flash if the
door is opened during the programme or is open
when the programme is started.
DW20.1: The start lamp flash if the door is
opened during the programme or is open when
the programme is started.
DW20.5: The time display flashes if the door is
opened during the program or is open when the
program is started.
4.3 Options
The machine stores the selected settings when
the start button is pressed, and these continue to
apply until new settings are made. A delayed
start and the upper/lower/mixed basket function
are not stored.
To Next Page
Loading...
Need help?
General
