What to do about spots left after washing in Asko DWCBI231 W/1?
If your Asko dishwasher leaves spots after washing, it may be because lipstick and tea can be difficult to wash off. Use a detergent with a bleaching agent.
Why are the dishes not clean after using my Asko DWCBI231 W/1?
If your Asko dishwasher isn't cleaning dishes properly, here's what to check: * Make sure the spray arms can rotate freely and aren't blocked by dishes. * Inspect the spray arm holes and bearings for blockages and clean the spray arms if necessary. Refer to the Care and cleaning chapter. * Select a more intensive program for heavily soiled dishes. * Ensure you're using the correct detergent dosage based on your water hardness. Using too much or too little detergent can affect cleaning performance. * Check the detergent's expiration date, as old detergent can be less effective. * Load the dishes correctly, avoiding overcrowding and ensuring that items don't block each other. Don't cover porcelain with large bowls and avoid placing tall glasses in the corners. * Make sure glas...
General| Appliance placement | Built-in |
|---|---|
| Built-in display | Yes |
| Drying system | Condensation drying |
| Delayed start timer | Yes |
| Delayed start (max) | 24 h |
| AquaStop function | Yes |
| Adjustable basket placement | Yes |
| Salt indicator | Yes |
| Rinse aid indicator | Yes |
| Power consumption (off) | 0.5 W |
| AC input voltage | 220 - 240 V |
| Weight | 45 kg |
| Type | Built-in |
| Number of place settings | 13 |
| Washing programs | Auto, Eco, Intensive, Quick, Glass |
| AC input frequency | 50 Hz |
| Width | 596 mm |
| Depth | 55 cm |
| Place settings | 13 |
| Programs | Auto, Eco, Intensive, Quick, Glass |
| Height | 819 mm |
| Dimensions (HxWxD) | 82 x 60 x 55 cm |
Key safety precautions for operating and using the dishwasher.
How to check water hardness and adjust the softener for optimal results.
Fine-tuning the water softener setting and filling the salt compartment.
How to add detergent and choose the correct wash program.
Adjusting water softener and controlling the interior light.
Instructions for cleaning the coarse/fine filters and the spray arms.
Explains error codes (F10-F56) and corresponding corrective actions.
Troubleshooting steps for a dishwasher that won't start or doesn't clean effectively.
How to resolve issues with water remaining, grease, or insufficient drying.
Critical safety guidelines and removing transport protection before installation.
Connecting water supply and electrical power according to regulations.
To Next Page
