Asko Hg1654s - User Manual

Other manuals for Asko Hg1654s

Questions and Answers

M
Matthew BarberAug 13, 2025
Why won't the burner on my Asko Hob ignite?
- R
  Rebecca WrightAug 13, 2025
  Several factors can prevent a burner from igniting. First, ensure the hob is properly connected to a power source by pushing the plug into the socket. Check the fuse and replace it if defective, or switch the automatic fuse back on. Clean and dry the sparkplug, and make sure that the burner parts are correctly installed using the centring ridges. Ensure that burner parts are clean, dry, and outflow holes are open. Also, confirm that the main gas tap is open, and that the gas bottle or tank is not empty. If problems persist, check with your gas supplier for faults in the gas network or contact your gas fitter to check that the gas used is suitable for the appliance.
H
hunterrobinsonAug 17, 2025
What to do if I smell gas near my Asko Hg1654s Hob?
- D
  Dana LewisAug 17, 2025
  If you smell gas near your Asko Hob, the gas connection may be leaking. Immediately turn off the gas mains and contact your gas fitter to resolve the issue.
J
John ReevesAug 21, 2025
Why does the burner on my Asko Hg1654s Hob not burn evenly?
- A
  Alan JohnsonAug 21, 2025
  Uneven burning can occur due to several reasons. First, make sure that the burner parts are correctly installed using the centring ridges. Second, ensure that the burner parts are clean and dry, and that the outflow holes are open. Finally, check that the type of gas used is suitable for the appliance; if not, contact your gas fitter.
J
Jessica JonesAug 25, 2025
Why does the burner on my Asko Hg1654s go out after igniting?
- G
  Gabrielle CarterAug 25, 2025
  If the burner goes out after igniting, it might be because the control knob was not kept pressed in long enough. Keep the control knob pressed in for at least 5 seconds.
P
piercejonathanAug 28, 2025
What to do if I smell gas near my Asko Kitchen Appliances?
- P
  Paul WareAug 28, 2025
  If you smell gas near your Asko Kitchen Appliances, it's possible the gas connection is leaking. Immediately turn off the gas mains and contact your gas fitter.
W
walkerhunterSep 1, 2025
Why does the burner go out after igniting on my Asko Kitchen Appliances?
- D
  Dr. Jacqueline Bailey DVMSep 1, 2025
  If your Asko Kitchen Appliances burner doesn't stay lit after ignition, ensure you hold the control knob pressed in for at least 5 seconds.
K
Kayla MooreSep 8, 2025
How to fix uneven burner flame on Asko Kitchen Appliances?
- R
  Ryan EdwardsSep 8, 2025
  If the burner on your Asko Kitchen Appliances is not burning evenly, ensure that the burner parts are correctly installed, clean, and dry. Also, verify that you are using the correct type of gas. To fix this: * Assemble the burner parts using the centring ridges. * Clean and dry the burner parts, making sure that the outflow holes are open. * Check that the gas used is suitable for the appliance. If not, contact your gas fitter.