Why does my new Asko Hob have a smell?
When you use the Asko hob a slight smell might be noticeable the first few times, because the new appliance is heating up. This is normal and will disappear after it has been used a few times. Ventilate the kitchen.
Why does the display keep flashing when I switch on a cooking zone on my Asko Hob?
If the display keeps flashing when you switch on a cooking zone on your Asko Hob, the pan you are using is not suitable for induction cooking, or has a diameter of less than 12 cm. Use a suitable pan.
Why does the fuse blow when I switch on my Asko Hob?
If a fuse blows as soon as the Asko hob is switched on, it might be wrongly connected. To solve this, check the electrical connections.
What to do if my Asko Hob displays 'u'?
If the display of your Asko hob shows ‘u’ when you switch on a cooking zone, it means that the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
What does error code E2 mean on my Asko Hob?
If you see error code E2 on your Asko hob, it means the appliance overheated and switched off. Let the appliance cool down, then start it again on a lower setting.
What does error code E3 mean on my Asko HI9ETA04 Hob?
If error code E3 is flashing on the display of your Asko hob, it indicates that you are using unsuitable cookware that lacks ferromagnetic properties. Use a suitable pot or pan.
What does error code FAN mean on my Asko HI9ETA04?
Error code FAN on your Asko Hob means that the air circulation is not good. Make sure the venting holes under the cooking plate are open.
What to do if my Asko Hob shows error code F00?
If your Asko Hob displays error code F00, it indicates that the control panel is dirty or has water on it. Clean the control panel to resolve this issue.
Why are my pans making noise on my Asko Hob?
If the pans make noise while cooking on your Asko hob, it is because of the energy flowing from the hob to the saucepan. At high settings, this is normal for some pans and won't damage the pans or the hob.
Why does the display light up when I first use my Asko HI9ETA04?
When the Asko hob is activated for the first time and the display lights up, this is normal operation.
General| Type | Induction |
|---|---|
| Width | 90 cm |
| Number of zones | 5 |
| Control type | Touch control |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Power Management | Yes |
| Installation | Built-in |
| Color | Black |
| Material | Glass ceramic |
| Total Power | 11100 W |
To Next Page
