What to do if my Asko Hob shows Er03 on the display?
If 'Er03' appears on the display of your Asko Hob, it indicates that the control panel is dirty or has water on it. To resolve this, clean the control panel.
What does it mean when E8 appears on my Asko HIHD854GF Hob display?
If 'E8' appears on the display of your Asko Hob, it means the ventilator is blocked, possibly by an item in the drawer. To fix this, unblock the ventilator and disconnect the appliance from the main voltage for 10 seconds.
Why is my Asko HIHD854GF Hob cooking zone flashing?
The display on your Asko Hob cooking zone may flash because the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
What to do if my Asko Hob zone stops unintended?
If a zone on your Asko Hob stops unexpectedly and the residual heat indicator is displayed, it means the zone is overheated. Allow the hob to cool down before continuing to cook.
Why does my Asko HIHD854GF Hob cooking zone suddenly stop working?
If a cooking zone on your Asko Hob suddenly stops working and you hear a signal, it's likely that the preset time has ended. Turn off the signal by pressing the - or + key on the timer.
What should I do if my Asko HIHD854GF Hob shows U400?
If 'U400' appears on the display of your Asko Hob with a continuous sound, it indicates that the voltage of the mains is too high. Connect the appliance in accordance to rating plate and instructions.
How to fix unstable connection between cookware and Asko HIHD854GF?
If you experience an unstable connection between your cookware and the Asko Hob, it could be due to a low battery in the cookware or an unstable Bluetooth connection. Try switching off the cooktop for 10 seconds and/or change the battery.
Why is the Celsius°Cooking™key blinking on my Asko Hob?
If the Celsius°Cooking™key is blinking along with the set cooking method key and display on your Asko Hob, it means the Celsius°Cooking™cookware is assigned to the wrong cooking zone. Remove the cookware and assign it again.
What does E65 mean on my Asko HIHD854GF?
If the E65 Celsius°Cooking™key is blinking together with E65 on your Asko Hob, it indicates that non-Celsius°Cooking™ cookware is not supported. Use Celsius°Cooking™ cookware.
What to do if Celsius°Cooking™cooking method key is blinking on Asko HIHD854GF?
If the set Celsius°Cooking™cooking method key is blinking together with the set temperature display while using the probe on your Asko Hob, it means the Celsius°Cooking™Probe is removed or not in touch with the content, or the temperature has fallen rapidly. Place the probe back or reposition it. Press the cooking method key if the probe isn't auto-detected.
General| Type | Induction Hob |
|---|---|
| Width | 80 cm |
| Number of Zones | 4 |
| Total Power | 7.4 kW |
| Control Type | Touch Control |
| Features | Timer, PowerBoost |
| Dimensions (W x D) | 800 x 520 mm |
| Cut-out Dimensions (W x D) | 750 x 490 mm |
To Next Page
