What to do if Asko Hob shows error code F8 or F08?
If error code F8 or F08 appears, it indicates that the Asko hob has overheated and automatically switched off. To resolve this, allow the appliance to cool down completely before using it again. When you restart, select a lower heat setting to prevent recurrence.
What to do if Asko HIG1995AB displays error code F00?
If your Asko hob displays error code F00, it means the control panel is either dirty or has water on it. Clean the control panel to resolve this issue.
Why is my Asko HIG1995AB not working and the display is off?
If your Asko hob stops working and nothing appears on the display, it might be due to a lack of power supply caused by a defective cable or a faulty connection. Check the fuses or the electric switch (if there is no plug).
What does error code FAN mean on my Asko HIG1995AB Hob?
If your Asko hob displays error code FAN, it indicates that air circulation is not optimal. Ensure that the venting holes under the cooking plate are not blocked and are fully open.
What does error code F7 mean on Asko HIG1995AB?
If the Asko hob shows error code F7, it means that the ambient temperature is not optimal. Turn off all heat sources near the cooking plate.
What does error code F99 mean on Asko HIG1995AB Hob?
If the Asko hob displays error code F99, it means you've pressed two or more buttons simultaneously. To fix this, make sure to only press one button at a time.
How to stop the signal when cooking zone suddenly stops on Asko Hob?
If a cooking zone on your Asko hob suddenly stops working and you hear a signal, the preset timer has likely ended. You can switch off the sound by pressing the + or - button on the timer.
What to do if ‘br’ appears on the Asko Hob display?
If ‘br’ appears on the display of your Asko hob and the touch controls aren't working, the bridge function is likely activated. Deactivate the bridge function to restore normal operation.
What does error code F9 mean on my Asko HIG1995AB Hob?
If error code F9 and/or a continuous beep is present, it means that the Asko hob has been connected incorrectly and/or the mains voltage is too high. You should have your connection changed.
Why does a fuse blow when I switch on my Asko HIG1995AB?
If a fuse blows as soon as the Asko hob is switched on, it indicates that the hob has been wrongly connected. Check the electrical connections.
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones/Burners | 5 |
| Width | 90 cm |
| Material | Ceramic Glass |
| Safety Features | Child lock |
| Burner types | Induction |
| Dimensions (WxD) | 90 x 51 cm |
| Total power | 11, 100 W |
To Next Page
