What does error code FA mean on an Asko HI1995G Hob?
If your Asko hob shows error code FA, it indicates that the mains voltage is too low. You should contact your energy supplier to address this issue.
Why is my Asko Hob not working and the display is blank?
If your Asko Hob isn't working and the display is blank, this indicates there is no power supply. Check the fuses or the electric switch (if there is no plug) to ensure proper power supply.
What does error code F8 and F08 mean on my Asko Hob?
Error codes F8 and F08 on your Asko Hob indicate that the appliance has overheated. The appliance has been switched off because of over heating. Allow the hob to cool down before using it again, and then start again on a lower setting.
What does error code FAN mean on my Asko HI1995G?
Error code FAN on your Asko Hob means that the air circulation is not good. Make sure the venting holes under the cooking plate are open.
What does error code F7 mean on my Asko HI1995G Hob?
Error code F7 on your Asko Hob indicates that the ambient temperature is not good. To resolve this, switch off all heat sources near the cooking plate.
What does error code F99 on Asko hob mean?
If your Asko hob shows error code F99, it means that you have pressed two or more buttons at the same time. To resolve this, ensure that you only operate one button at a time.
What does error code F7 mean on an Asko HI1995G?
If the Asko hob displays error code F7, it indicates that the ambient temperature is not optimal. To solve this, switch off all heat sources located near the cooking plate.
What to do if ‘br’ appears on my Asko HI1995G display and the touch controls are not working?
If ‘br’ appears in the display of your Asko hob and the touch controls are not working, it means that the bridge function is activated. To restore normal operation, deactivate the bridge function.
What to do if Asko HI1995G shows error code F8 or F08?
Error code F8 or F08 on your Asko hob indicates that the appliance has overheated. The hob was automatically switched off to prevent damage. To resolve this, allow the appliance to cool down completely. After it has cooled, you can start cooking again, but it's recommended to use a lower power setting to prevent future overheating.
What to do if my Asko HI1995G shows error code FA?
If your Asko Hob displays error code FA, it indicates that the mains voltage is too low. Contact your energy supplier to address this issue.
General| Type | Induction Hob |
|---|---|
| Number of Cooking Zones/Burners | 5 |
| Width | 90 cm |
| Control Type | Touch Control |
| Burner Types | Induction |
| Dimensions (WxD) | 900 mm x 520 mm |
| Safety Features | Child Lock |
To Next Page
