To Next Page
T
thomaspeggyAug 16, 2025
Why does the fuse blow when I switch on my Asko HI1621G?
- SSandra GriffinAug 16, 2025
If a fuse blows as soon as the Asko hob is switched on, it might be wrongly connected. To solve this, check the electrical connections.
Why does the fuse blow when I switch on my Asko HI1621G?
If a fuse blows as soon as the Asko hob is switched on, it might be wrongly connected. To solve this, check the electrical connections.
What does error code E2 mean on my Asko Hob?
If you see error code E2 on your Asko hob, it means the appliance overheated and switched off. Let the appliance cool down, then start it again on a lower setting.
What does error code E3 mean on my Asko Hob?
If error code E3 is flashing on the display of your Asko hob, it indicates that you are using unsuitable cookware that lacks ferromagnetic properties. Use a suitable pot or pan.
What does error code U400 mean on my Asko Hob?
If you see error code U400 and/or a continuous beep on your Asko hob, it means the appliance has been connected incorrectly, or the mains voltage is too high. To resolve this, have your connection changed.
How to fix Er03 error on Asko HI1621G?
If your Asko hob displays a continuous beep and Er03 flashes on the display, the control panel is likely dirty or has water on it. Clean the control panel to resolve this issue.
Why is the ‘Flash’ symbol showing on my Asko HI1621G Hob?
If you see the ‘Flash’ symbol on your Asko hob, it means you have pressed two or more keys at the same time. Avoid operating more than one key simultaneously.
Why does the display light up when I first use my Asko Hob?
When the Asko hob is activated for the first time and the display lights up, this is normal operation.
Why does the fan keep running after I turn off my Asko HI1621G?
If the fan continues to run for several minutes after your Asko hob has been switched off, this is normal operation.
Why are my pans making noise on my Asko HI1621G?
If the pans make noise while cooking on your Asko hob, it is because of the energy flowing from the hob to the saucepan. At high settings, this is normal for some pans and won't damage the pans or the hob.
What to do if my Asko HI1621G displays 'u'?
If the display of your Asko hob shows ‘u’ when you switch on a cooking zone, it means that the pan you are using is not suitable for induction cooking or has a diameter of less than 12 cm. Use a suitable pan.
General| Hob type | Zone induction hob |
|---|---|
| Product color | Black |
| Hob width size | 60 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 1 type | Simmer |
| Cooking zone 2 type | Large |
| Number of cooking zones | 4 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Built-in hood | No |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Connected load (gas) | 0 W |
| Energy efficiency class | - |
| Connected load (electric) | 7400 W |
| Power consumption (standby) | 0.5 W |
| Package depth | 725 mm |
| Package width | 650 mm |
| Package height | 180 mm |
| Package weight | 11000 g |
| Control type | Touch |
| Built-in display | Yes |
| Control position | Front |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 600 mm |
| Height | 54 mm |
| Weight | 10500 g |
| Installation compartment depth | 560 mm |
| Installation compartment width | 558 mm |
| Installation compartment depth (min) | 77 mm |
Details the functions of all keys, displays, and controls on the induction hob's interface.
Explains how temperature sensors protect the hob and pans from overheating.
Explains setting power levels, the boost function, and its power management.
Step-by-step guide on how to turn on the hob and set the initial cooking power level.
Instructions for changing power levels, switching off zones, and the entire hob.
Guides on setting the cooking timer for zones and the general kitchen timer.
Lists common symptoms, causes, and solutions, including error codes for fault diagnosis.
