Asko HI 1975 G - User Manual

Questions and Answers

M
marthasmithAug 13, 2025
What to do if my Asko Hob is not working and nothing appears on the display?
- M
  Marilyn RobinsonAug 13, 2025
  If your Asko Hob isn't working and the display is blank, the issue might be with the power supply. Please, check the fuses or the electric switch to ensure they are working properly. The cause might be a defective cable or a faulty connection.
D
Daniel AdamsAug 17, 2025
Why does error code F00 appear on my Asko HI 1975 G?
- A
  April LambertAug 17, 2025
  If error code F00 is displayed on your Asko Hob, it indicates that the control panel is either dirty or has water on it. To resolve this, clean the control panel thoroughly.
A
aliceholtAug 20, 2025
What does error code F8 and F08 mean on my Asko HI 1975 G Hob, and what should I do?
- S
  Stephen BowersAug 20, 2025
  Error codes F8 and F08 on your Asko Hob indicate that the appliance has overheated. The hob has been switched off to prevent damage. Allow the appliance to cool down completely before using it again, and then restart it on a lower setting.
A
Adam LawsonAug 25, 2025
What does error code FAN mean on my Asko Hob?
- H
  Hannah YoungAug 25, 2025
  Error code FAN on your Asko Hob indicates poor air circulation. Ensure that the venting holes under the cooking plate are not blocked and are open to allow proper airflow.
L
Laura GarnerAug 28, 2025
Why does a fuse blow as soon as my Asko HI 1975 G Hob is switched on?
- S
  sherrijacksonAug 28, 2025
  If a fuse blows immediately when you switch on your Asko Hob, it suggests that the hob has been incorrectly connected. You should check the electrical connections to ensure they are properly configured.
J
jessica16Aug 31, 2025
What does error code F7 mean on my Asko HI 1975 G Hob and what should I do?
- L
  Leah RichardsonAug 31, 2025
  Error code F7 on your Asko Hob indicates that the ambient temperature is not optimal. To resolve this, switch off any nearby heat sources that could be affecting the cooking plate's temperature.
L
Lisa ThomasSep 5, 2025
How to fix error code F99 on Asko HI 1975 G?
- J
  Jacob ReedSep 5, 2025
  Error code F99 on your Asko Hob appears when two or more buttons are pressed simultaneously. To resolve this, ensure that you only press one button at a time when operating the hob.
M
mikaylafitzgeraldSep 8, 2025
Why does my Asko HI 1975 G display keep flashing when I switch on a cooking zone?
- L
  Leslie ArnoldSep 8, 2025
  If the display on your Asko Hob flashes when you switch on a cooking zone, it's likely because the pan you're using isn't suitable for induction cooking or has a diameter smaller than 12 cm. Use a pan designed for induction cooking.