Asko Hg1984a - User Manual

Other manuals for Asko Hg1984a

Questions and Answers

A
andreawolfAug 12, 2025
Why won't the burner on my Asko Hg1984a ignite?
- S
  Sarah BennettAug 12, 2025
  Several factors can prevent a burner from igniting. First, ensure the hob is properly connected to a power source by pushing the plug into the socket. Check the fuse and replace it if defective, or switch the automatic fuse back on. Clean and dry the sparkplug, and make sure that the burner parts are correctly installed using the centring ridges. Ensure that burner parts are clean, dry, and outflow holes are open. Also, confirm that the main gas tap is open, and that the gas bottle or tank is not empty. If problems persist, check with your gas supplier for faults in the gas network or contact your gas fitter to check that the gas used is suitable for the appliance.
Q
qclarkAug 15, 2025
What to do if I smell gas near my Asko Hg1984a Hob?
- C
  Cynthia LopezAug 15, 2025
  If you smell gas near your Asko Hob, the gas connection may be leaking. Immediately turn off the gas mains and contact your gas fitter to resolve the issue.
J
Joshua SmithAug 19, 2025
Why does the burner on my Asko Hob not burn evenly?
- J
  Jonathan RussellAug 19, 2025
  Uneven burning can occur due to several reasons. First, make sure that the burner parts are correctly installed using the centring ridges. Second, ensure that the burner parts are clean and dry, and that the outflow holes are open. Finally, check that the type of gas used is suitable for the appliance; if not, contact your gas fitter.
L
lorraine91Aug 23, 2025
Why does the burner on my Asko Hg1984a Hob go out after igniting?
- L
  laura21Aug 23, 2025
  If the burner goes out after igniting, it might be because the control knob was not kept pressed in long enough. Keep the control knob pressed in for at least 5 seconds.
V
Vincent WoodsAug 27, 2025
What to do if I smell gas near my Asko Kitchen Appliances?
- P
  Paul DouglasAug 27, 2025
  If you smell gas near your Asko Kitchen Appliances, it's possible the gas connection is leaking. Immediately turn off the gas mains and contact your gas fitter.
V
vwilliamsAug 30, 2025
Why does the burner go out after igniting on my Asko Kitchen Appliances?
- M
  Michael BurgessAug 30, 2025
  If your Asko Kitchen Appliances burner doesn't stay lit after ignition, ensure you hold the control knob pressed in for at least 5 seconds.
J
Jonathan HuangSep 7, 2025
How to fix uneven burner flame on Asko Kitchen Appliances?
- M
  Michael OwensSep 7, 2025
  If the burner on your Asko Kitchen Appliances is not burning evenly, ensure that the burner parts are correctly installed, clean, and dry. Also, verify that you are using the correct type of gas. To fix this: * Assemble the burner parts using the centring ridges. * Clean and dry the burner parts, making sure that the outflow holes are open. * Check that the gas used is suitable for the appliance. If not, contact your gas fitter.