Ignition and adjustment
The burner is fully adjustable between high and low settings.
1. Press the control knob and turn it anticlockwise. The burner will
ignite.
2. Keep the control knob fully depressed for at least 3 seconds
between high and low settings. The thermocouple safety pilot has
been activated.
3. Turn the wok control knob to the low setting (3).
4. If desired, turn the wok selector ring to the roasting setting (5). The
inner ring (wok setting) will switch off and the outer ring (roasting
setting) will switch on.
5. The wok burner will switch automatically to the wok setting if the
control knob of the wok burner is set to 0.
NOTE!
It is possible to switch between wok setting and roasting setting and back during cooking.
If the control knob is in the off setting (0-setting) the selector ring cannot be changed to the
roasting setting. Always turn this knob back completely to 0.
29
Wok burner operation
To Next Page
Loading...
