Asko HIHD854GF - The Hestan Cue App

The Hestan Cue App
• The Hestan Cue will help you cook better food more often by acting as your GPS in the kitchen.
You'll learn new techniques, novel combinations and gain a sense of confidence in what you're
cooking. The first few times you cook with the Hestan Cue app, it may feel a bit unusual to give
up the routine of checking and adjusting the power level all the time, but if you trust the system
and follow the directions, you'll end up with an amazing meal.
• Our recipes lead you through the process of 'Mise En Place', where you'll gather and prepare
all of your ingredients in advance. This is particularly important when cooking with the Hestan
Cue app as each recipe has been carefully timed out to give you the perfect results (we don't
want your salmon burning while you search for the garlic!).
• Many recipes in the Hestan Cue app will ask you to select a thickness for your protein. It is
important to measure carefully and accurately as your Hestan Cue will calculate cook-times
based on the number. We recommend measuring from the thickest part of your dish for the best
results, but you should get a feel for what works best with your preferences.
• Tempering is another technique used in the Hestan Cue app to make sure your meat cooks
properly. Steaks, chops, and filets cook more evenly when put in the pan at room temperature.
So we typically advise leaving your meat unwrapped on the counter for 15-20 minutes before
cooking it. Usually, by the time your sauce is done, your meat should be good to cook!
Getting started with the Hestan Cue App
You can download the Hestan Cue App from the Apple App Store or
Google Play Store. When paired, the app can be used to control your
Celsius°Cooking™ Probe or Pan. Filled with inspiring recipes and
chef-tested techniques, the app will provide you with step-by-step
instructions and how-to videos.
Registering and Pairing your Celsius°Cooking™
• After opening the Hestan Cue App, you'll be prompted to log in / create an account. First-time
users can create a new account by selecting 'Get Started' on the first screen. You must be
logged in to use the features of the app.
• Once you've created an account you will be led through the process of pairing your Induction
hob and cookware. Your devices will register automatically and can be renamed and removed
as needed. Before you can start the pairing process, Bluetooth pairing must be activated
in the hob settings (see chapter 'Settings'- btP)!
• You may need to update the firmware on your induction hob and cookware once they've been
paired. The app will automatically take you through this process which may take a few minutes.
When updating firmware, make sure not to close, minimize or navigate away from the app. If a
problem occurs during a firmware update, you can try again by quitting the app and logging in
again to go through the process. Before the firmware can be updated, firmware update over
the air (FoA) must be activated in the hob settings (see chapter 'Settings' - FoA)!
36
Operation