19
FAULT TRACING
INCORRECT LANGUAGE ON THE DISPLAY
If for some reason the language on the display has
changed, you can go back to the original langua-
ge.
Earlier models had two versions of the machine
(Alternatives 1 and 2) but now all eleven langua-
ges are present in all machines.
Alternative 1: The languages you can choose
from are Danish, Finnish, French, Dutch, Nor-
wegian and Swedish.
Alternative 2: The languages you can choose
from are English, French, Italian, Portuguese,
Spanish and German.
To change the language, do this:
Switch off the mains power button,
, and
press it again to restart the machine.
Press the
button five times, then press the
button five times. These 10 button presses
must be done within 15 seconds.
Within 3 seconds of last pressing the
but-
ton, use the
buttons to step through to
the language you want.
To Next Page
Loading...
