Asko WM25 User Manual

Type: WM25
Service manual
Contents
Introduction .....................................................................................................................................................................................................3
Type overview .................................................................................................................................................................................................4
Programme .......................................................................................................................................................................................................5
Indication of programme sequence ........................................................................................................................................................7
Options and settings .....................................................................................................................................................................................7
Variant settings ...............................................................................................................................................................................................9
Test programme ............................................................................................................................................................................................10
Fault indications............................................................................................................................................................................................12
Components and measurement values ...............................................................................................................................................13
Technical data ................................................................................................................................................................................................15
Circuit diagram ..............................................................................................................................................................................................16
Timer diagram ..............................................................................................................................................................................................18
This service manual describes washing machine type WM25 and is a supplement to the general service
manual for the 600 series.

Asko WM25 Specifications

General

Brand	Asko
Model	WM25
Category	Washer
Language	English

Summary

Introduction

Type overview

WM25.1 (USA)

Overview of WM25.1 model with programme and options.

WM25.2 (B)

Overview of WM25.2 model with programme, options, and display.

WM25.3 Variants

Overview of WM25.3 models (C/CI, D/DI) with programmes and CIM motor.

Programme

WM25.1 (USA) Programmes

Programme details for the WM25.1 USA model.

WM25.2/WM25.3 (3 rinses)

Programme details for WM25.2/WM25.3 with 3 rinses.

WM25.2/WM25.3 (5 rinses)

Programme details for WM25.2/WM25.3 with 5 rinses.

WM25.3 CIM-motor (3 rinses)

Programme details for WM25.3 CIM with 3 rinses.

WM25.3 CIM-motor (5 rinses)

Programme details for WM25.3 CIM with 5 rinses.

Indication of programme sequence

Options and settings

Key Options and Delayed Start

Details on optional features like temperature, extra rinses, and delayed start.

Advanced Delay Start

Setting a 1-24 hour delay start on newer models.

Settings

Spin speed and motor action

Details on selecting spin speeds and motor actions.

Temperature selection

Explanation of temperature settings from Cold to 95°C.

Variant settings

Configuration Procedures

Steps for total reset, rinse count, and door opening settings.

Special Function Settings

How to set Super rinse, Delayed Start, and Temp/Spin options.

Test programme

Total reset and starting test programme

Steps to reset and start the test programme.

Testing LEDs

Procedure for testing all panel LEDs.

Testing inlet valves and water level

How to test inlet valves and water level sensors.

Testing component functions

Testing element, motor, thermistor, etc.

Detailed test procedures for various components.

Fault indication during testing

Interpreting LED flashes as fault indicators.

Fault indications

Water Level Faults (F:1, F:4)

Fault codes F:1 (overfilling) and F:4 (water supply).

Operational Faults (F:3, F:6)

Fault codes F:3 (drainage) and F:6 (door opening).

Components and measurement values

Motor and CIM-motor specifications

Measurement values for motors and CIM motors.

Heating Element and Thermistor

Specifications for heating element and thermistor.

Drain Pump and Level Switch

Measurement values for drain pumps and level switch.

Component Specifications

Pressure sensor and EMC filter

Specs for pressure sensor and EMC filter.

Inlet valve and Door lock

Measurement values for inlet valve and door lock.

Control Units and Frequency motor control

Details on control units and motor control.

Technical data

Dimensions and Weight

Physical specifications of the washing machine.

Capacity and Performance

Washing capacity, spin speeds, and power data.

Materials and Connections

Details on materials used and connections.

Circuit diagram CIM motor

Circuit diagram

Timer diagram

Components and Action Types

Overview of components and action type definitions.

Program Flow

Detailed timer diagram for programs 1-10.

Options

Timer diagram representation of options like Super rinse.

Timer diagram table explanation

Action Type and Motor Action Definitions

Explanations for action types and motor actions.

Inlet Valve and Level Table Definitions

Definitions for inlet valves and water level table.