EasyManua.ls Logo

ASM Zip-Spray 1700 - User Manual

ASM Zip-Spray 1700
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
309421K
ti6911a
Operation, Repair, and Parts List
– For portable spray application of architectural paints and coatings –
US Patent No. 6,752,067
1700 Airless Paint Sprayer
Model 233789
3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this
manual. Save these instructions.
Table of Contents
Warnings 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Grounding and Electrical Requirements 4. . . . . . . . . . .
Pressure Relief Procedure 5. . . . . . . . . . . . . . . . . . . . . . .
Component Function and Identification 6. . . . . . . . . . . .
Setup 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Priming 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Selection 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Spraying Techniques 16. . . . . . . . . . . . . . . . . . . . . . . . . . .
Shutdown and Cleaning 18. . . . . . . . . . . . . . . . . . . . . . . .
General Repair Instructions 21. . . . . . . . . . . . . . . . . . . . .
Basic Troubleshooting 22. . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Troubleshooting 24. . . . . . . . . . . . . . . . . . . . . .
List of Kits 31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motor Diagnostics 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Board Diagnostics 32. . . . . . . . . . . . . . . . . . . . . .
Pump Diagnostics 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pump Repair 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts 34. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data 37. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ASM Warranty 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Other manuals for ASM Zip-Spray 1700

Questions and Answers

  • N
    Nicole BrownAug 29, 2025
    Why won't my ASM Zip-Spray 1700 Paint Sprayer pump prime?
    • E
      Eric FoxAug 29, 2025
      If your ASM Paint Sprayer pump won't prime, ensure the Spray–Prime/Drain valve is in the PRIME/DRAIN position. Check if the inlet screen is clogged or the suction tube isn't immersed in paint; clean the screen and ensure the tube is at the bottom of the paint pail. The balls in the check valve could be stuck or the valves damaged, so clean or replace the check valves. Also, the suction tube might be leaking, so tighten the connection and inspect for cracks.
  • L
    lopezamandaAug 28, 2025
    What to do if my ASM Zip-Spray 1700 Paint Sprayer's motor doesn't run?
    • A
      Andrea AyalaAug 28, 2025
      If your ASM Paint Sprayer's motor doesn't run, even when the power switch is on and the sprayer is plugged in, it could be due to a few reasons. The pressure might be set at zero, so turn the Pressure Control knob clockwise to increase the pressure setting. The electrical outlet might not be providing power, so try a different outlet or test the outlet with a working device. Reset the building circuit breaker or replace the fuse. The extension cord or sprayer electrical cord could be damaged, so replace the extension cord or check the sprayer cord for damage. Also, the paint might be frozen or hardened in the pump.
  • D
    Diana MitchellAug 27, 2025
    How to fix inconsistent spray pattern with ASM Paint Sprayer?
    • C
      Chris KingAug 27, 2025
      If your ASM Paint Sprayer's spray pattern is inconsistent or leaves stripes, it could be due to low pressure. Try turning the Pressure Control knob clockwise to increase the pressure. Another reason could be a worn spray tip, so replace it.
  • D
    Daniel ClaytonAug 27, 2025
    What to do if my ASM Zip-Spray 1700 pump cycles, but paint only dribbles or spurts?
    • C
      Christopher McclureAug 27, 2025
      If your ASM Paint Sprayer pump cycles but the paint only dribbles or spurts when the spray gun is triggered, it could be due to several reasons. The pressure might be set too low, so slowly turn the Pressure Control knob clockwise to increase the pressure. The spray tip might be plugged, so unplug it. The fluid filter or spray gun fluid filter could be clogged, so clean or replace them.
  • J
    jbanksAug 25, 2025
    What to do if my ASM Paint Sprayer's building circuit breaker opens?
    • C
      Christopher PerezAug 26, 2025
      If the building circuit breaker opens after your ASM Paint Sprayer runs for a few minutes, it could be because too many appliances are on the same circuit; try freeing up the circuit or using a less busy one. Another cause could be a damaged sprayer electrical cord; check for broken insulation or wires and replace the cord if damaged.
  • C
    caitlin40Aug 25, 2025
    What to do if my ASM Paint Sprayer pump cycles but does not build up pressure?
    • H
      Heidi LongAug 25, 2025
      If your ASM Paint Sprayer pump cycles but doesn't build up pressure, there are several potential causes. First, ensure the pump is properly primed. Check if the inlet screen is clogged or the suction tube isn't immersed in paint; clean the screen and ensure the tube is at the bottom of the paint pail. Make sure the paint pail is not empty and refill it if needed, then reprime the sprayer. Inspect the suction tube for leaks and tighten the connection if necessary. Also, the Spray–Prime/Drain valve may be worn or obstructed with debris; check and clean it, ensuring proper torque (185 in-lb or 21 N m), and replace if worn.

Summary

Safety Precautions

Fire and Explosion Hazards

Dangers from flammable fumes and ignition sources.

Electric Shock Hazards

Risks from improper grounding, setup, or wet conditions.

Skin Injection Hazards

Severe injury from high-pressure fluid injection.

Equipment Misuse Hazards

Risks from exceeding pressure limits or modifying equipment.

Maintenance and Troubleshooting

Basic Troubleshooting

Solutions for common operating issues and their causes.

Advanced Troubleshooting

In-depth diagnostics for electrical, motor, and pump problems.

ASM Zip-Spray 1700 Specifications

General IconGeneral
Max. Working Pressure3000 psi
Flow Rate0.31 GPM
Maximum Pressure3000 psi
Spray PatternAdjustable
Power SourceElectric
TypeAirless
Max. Tip Size0.017 inch

Related product manuals