24 of 38
Viewing the LED screen
This is the LED Manager tab. It allows you to configure the LED functionality threshold.
IMPORTANT: YOU CAN ONLY ENTER WHOLE NUMBERS DIVISIBLE BY 4. Example: 100, 80,
60 (no odd numbers) etc. If you enter a value that is not divisible by 4; then you will
get the message: “The value Yellow or Green must divide by 4!”
LED screen
Rescanning your Powerline Network
Use the Rescan button to scan for your Powerline devices under the same Network
Password in your HomePlug network. This option refreshes the information on your
Power Manager.
To Next Page
Loading...
