EN - 15
1
2
3
4
5
6
1
munite
1
second
1
munite
The level is set to 3 as default. If the water is well water or has a hardness level
1 0-5 0-9 0-6 Wash LED is on.
2 6-11 10-20 7-14 Dry LED is on.
3 12-17 21-30 15-21 End button is on.
4 18-22 31-40 22-28 Wash and Dry LEDs are on.
5 23-34 41-60 29-42 Wash and End LEDs are on.
6 35-50 61-90 43-63
Dry and End LEDs
are on.
The dishwasher is equipped with a water softener which reduces the hardness in the
company or use the test strip (if available).
•
•
• Release the Up button when all leds blink once. The last setting level is viewed.
• Press the Up or Down button to increase or decrease the hardness level respectively.
•
To Next Page
Loading...
