EN - 17
the rinse-aid compartment cap. Fill the
compartment with rinse aid to the MAX
level and then close the cap. Be careful not
wipe up any spills.
•
• Press the Up button for at least 5
seconds immediately after the machine is
turned on.
• Release the Up button when all leds
blinks twice. The last setting level is
displayed.
• Press Up or Down button to increase or
decrease the hardness level.
•
If the dishes are not drying properly or are
spotted, increase the level. If blue stains
form on your dishes, decrease the level.
1 Rinse-aid not
dispensed
Wash LED is on.
2 1 dose is
dispensed
Dry LED is on.
3 2 doses are
dispensed
End LED is on.
4 3 doses are
dispensed
Wash and Dry LEDs
are on.
5 4 doses are
dispensed
Wash and End
LEDs are on.
To Next Page
Loading...
