Buzzer sounds 5 times each
at 5 minutes intervals (in 0, 5, 10 and 15th
of the program.(model depending)
To activate or deactivate save power mode,
follow the below steps:
1. Open the door and press Up (2) and
Half Load (4) buttons simultaneously for 3
seconds.
2. After 3 seconds, the machine will display
last setting.
3. When Save Power Mode is activated,
Wash, Dry, End monitoring lights will be on.
minutes after the door is opened, and the
activity in order to save energy.
4. When Save Power Mode is deactivated
Wash, Dry monitoring lights will be on. If
Save Power Mode is deactivated, interior
lights will be on as long as the door is open,
and the machine will always be on unless it
machine.
In factory setting, Save Power Mode is
active.
EN - 25
To Next Page
Loading...
