Aspira TWLWP50 User Manual (English)

Questions and Answers:

S
Scott ColeJul 30, 2025
What to do if my Aspira TWLWP50 display shows E4?
- C
  Carol ChambersJul 30, 2025
  If the display shows 'E4', the issue might be related to the water supply. Here's what you can do: * Ensure the water tap is open. If it was closed, open it and then push the Start / Pause button once. * Check if the water inlet valve is blocked. If it is, clean it and then push the Start / Pause button once. * Verify that the water pressure is normal. If it's too low, wait until the water pressure returns to normal before using the machine.
I
ismithAug 3, 2025
Why is my Aspira Washer not working?
- C
  Cassandra EricksonAug 3, 2025
  If your Aspira Washer isn't working, consider these possible causes: * Check for a power failure. If there is one, wait for the power supply to be restored. * Ensure the power plug is securely inserted into the socket. If it's loose, insert it tightly. * Verify that the water level has reached the preset position. If not, wait for the water to fill to the required level.
G
Gregory SawyerAug 7, 2025
How to fix Aspira Washer that does not drain properly?
- K
  Kimberly GordonAug 7, 2025
  If your Aspira washer isn't draining correctly (either not draining at all or draining very slowly), the drain hose might be blocked. Remove any blockage you find in the hose. After doing so, open and close the top lid once.
T
Thomas JarvisAug 12, 2025
Why does my Aspira Washer make abnormal sounds?
- C
  Cynthia FernandezAug 12, 2025
  Abnormal sounds from your Aspira washer can be due to several reasons: * Check if the machine is level. If not, level the machine. * Make sure the laundry is evenly distributed inside the machine. If it's not, redistribute the load and close the top lid. * Inspect the bowl for any foreign objects. If you find any, remove them.
O
ogomezAug 16, 2025
What to do if Aspira TWLWP50 stops mid-cycle?
- D
  Dennis Adkins IIAug 16, 2025
  If your Aspira Washer stops running mid-cycle, it might be because the top lid is not completely closed. Ensure that the top lid is properly closed.
D
David BryantAug 20, 2025
Why is my Aspira Washer not spinning?
- M
  Matthew WebsterAug 20, 2025
  If your Aspira Washer isn't spinning, there are a couple of things to check: * Make sure the laundry is evenly placed inside the machine. If the load is uneven, redistribute it and close the top lid. * Confirm that the machine is level. If it isn't, level the machine. The machine will start 10 seconds after being levelled correctly.