TRX40D8-2N2T
46 47
English
PCIE Slot 3 Link Width
Use this item to set PCIE Slot3's Link Width.
PCIE Slot 5 Link Width
Use this item to set PCIE Slot5's Link Width.
PCIE Slot 7 Link Width
Use this item to set PCIE Slot7's Link Width.
PS2 Y-Cable
Enable the PS2 Y-Cable or set this option to Auto.
Restore AC Power Loss
is allows you to set the power state aer a power failure. If [Power O] is selected, the
power will remain o when the power recovers. If [Power On] is selected, the system will
start to boot up when the power recovers.
Restore AC Power Current State
is allows you to restore AC Power Current State.
To Next Page
Loading...
Need help?
General
