TRX40D8-2N2T
66 67
English
3.6 Security
In this section, you may set or change the supervisor/user password for the system. For the
user password, you may also clear it.
Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.
User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.
Secure Boot
Enable to support Windows 8 Secure Boot. e default value is [Disabled].
Secure Boot Mode
Secure Boot mode options: Standard or Custom. In Custom mode, Secure Boot
Policy variables can be congured by a physically present user without full authen-
tication.
To Next Page
Loading...
Need help?
General
