ASROCK Rack TRX40D8-2N2T - 3.6.1 Key Management

68 69
English
3.6.1 Key Management
In this section, expert users can modify Secure Boot Policy variables without full authenti-
cation.
Factory Key Provision
Install factory default Secure Boot keys aer the platform reset and while the System
is in Setup mode.
Install Default Secure Boot Keys
Please install default secure boot keys if it’s the rst time you use secure boot.
Clear Secure Boot keys
Force System to Setup Mode - clear all Secure Boot Variables. Change takes eect
aer reboot.
Export Secure Boot variables
Copy NVRAM content of Secure Boot variables to les in a root folder on a le
system device.
Enroll E Image
Allow the image to run in Secure Boot mode. Enroll SHA256 Hash certicate of a
PE image into Authorized Signature Database (db).