ASROCK G41C-GS - Page 38

3838
3838
38
DRAM CH0 G3 (Control2)
This controls the number of DRAM CH0 G3 (Control2). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH0 G4 (Clocks1)
This controls the number of DRAM CH0 G4 (Clocks1). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH0 G5 (Clocks2)
This controls the number of DRAM CH0 G5 (Clocks2). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 RCOMP ODT
This controls the number of DRAM CH1 RCOMP ODT. Min: 1. Max: 63. The
default value is [Auto].
DRAM CH1 G0 (Data)
This controls the number of DRAM CH1 G0 (Data). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 G1 (Command)
This controls the number of DRAM CH1 G1 (Command). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 G2 (Control1)
This controls the number of DRAM CH1 G2 (Control1). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 G3 (Control2)
This controls the number of DRAM CH1 G3 (Control2). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 G4 (Clocks1)
This controls the number of DRAM CH1 G4 (Clocks1). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH1 G5 (Clocks2)
This controls the number of DRAM CH1 G5 (Clocks2). Min: 1. Max: 15. The
default value is [Auto].
DRAM CH0 tRD
This controls the number of DRAM CH0 tRD. Min: 0. Max: 30. The default
value is [Auto].
DRAM CH1 tRD
This controls the number of DRAM CH1 tRD. Min: 0. Max: 30. The default
value is [Auto].