ASROCK G41C-GS - DRAM DLL SKEW Configuration

3939
3939
39
DRAM DLL SKEW Configuration
BIOS SETUP UTILITY
DRAM DLL SKEW Settings
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
DRAM CH0 CLKSET0 SKEW
[Auto]
DRAM CH0 CLKSET0 SKEW Info:0-0-0-0-0-0
DRAM CH0 CLKSET1 SKEW
[Auto]
DRAM CH0 CLKSET1 SKEW Info:0-0-0-0-0-0
DRAM CH0 CMD SKEW
[Auto]
DRAM CH0 CMD SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL0 SKEW
[Auto]
DRAM CH0 CTRL0 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL1 SKEW
[Auto]
DRAM CH0 CTRL1 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL2 SKEW
[Auto]
DRAM CH0 CTRL2 SKEW Info :0-0-0-0-0-0-0
DRAM CH0 CTRL3 SKEW
[Auto]
DRAM CH0 CTRL3 SKEW Info :0-0-0-0-0-0-0
DRAM CH1 CLKSET0 SKEW Info:1-5-1-1-0-128
DRAM CH0 CLKSET0 SKEW
This controls the number of DRAM CH0 CLKSET0 SKEW. The default value
is [Auto].
DRAM CH0 CLKSET1 SKEW
This controls the number of DRAM CH0 CLKSET1 SKEW. The default value
is [Auto].
DRAM CH0 CMD SKEW
This controls the number of DRAM CH0 CMD SKEW. The default value is
[Auto].
DRAM CH0 CTRL0 SKEW
This controls the number of DRAM CH0 CTRL0 SKEW. The default value is
[Auto].
DRAM CH0 CTRL1 SKEW
This controls the number of DRAM CH0 CTRL1 SKEW. The default value is
[Auto].
DRAM CH0 CTRL2 SKEW
This controls the number of DRAM CH0 CTRL2 SKEW. The default value is
[Auto].
DRAM CH0 CTRL3 SKEW
This controls the number of DRAM CH0 CTRL3 SKEW. The default value is
[Auto].
DRAM CH1 CLKSET0 SKEW
This controls the number of DRAM CH1 CLKSET0 SKEW. The default value
is [Auto].
DRAM CH1 CLKSET1 SKEW
This controls the number of DRAM CH1 CLKSET1 SKEW. The default value
is [Auto].