ASROCK G41M-VS2 User Manual

4141
4141
41
BIOS SETUP UTILITY
Storage Configuration
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
device is used.
Set [Enhanced]
when Native OS
(Win2000 / XP)
is used.
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
ATA/IDE Configuration
[Enhanced]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
IDE1 Master
IDE1 Slave
SATAII_1
SATAII_2
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
3.4.43.4.4
3.4.43.4.4
3.4.4
Storage ConfigurationStorage Configuration
Storage ConfigurationStorage Configuration
Storage Configuration
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows
®
NT). If
native OS (Windows
®
XP / Vista
TM
) is installed, please select
[Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2], [SATA 1, IDE 1], and
[IDE 1, SATA 2]. If it is set to [SATA 1, IDE 1], then SATAII_2 will not work.
Likewise, if it is set to [IDE 1, SATA 2], then SATAII_1 will not work.
Because Intel
®
ICH7 south bridge only supports two IDE devices
under legacy OS (Windows NT), you have to choose [SATA 1, SATA2],
[SATA 1, IDE 1], or [IDE 1, SATA 2] when the installed device is used
with legacy OS.
[SATA 1, SATA 2] [SATA 1, IDE 1] [IDE 1, SATA 2]
Master SATAII 1, SATAII 2 SATAII 1 SATAII 2
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction.
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
®
Vista
TM
certification.

ASROCK G41M-VS2 Specifications

General

Non-ECC	Yes
Number of memory slots	2
Maximum internal memory	8 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Compatible processor series	Intel® Celeron®
Number of Parallel ATA connectors	1
USB 2.0 ports quantity	4
Firewire (IEEE 1394) ports	0
Audio chip	Realtek ALC662
Certification	FCC, CE
Power source type	ATX
Audio output channels	5.1 channels
Motherboard form factor	micro ATX
Compatible operating systems	Win XP, Vista, 7
Maximum graphics card memory	1759 MB
Networking features	10/100 Mbps
BIOS memory size	64 Mbit

Weight and Dimensions

Depth	170 mm
Width	244 mm