EasyManuals Logo

ASROCK J4125-ITX User Manual

ASROCK J4125-ITX
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
9
English
J5040-ITX
J4125-ITX
is is a Mini-ITX form factor motherboard. Before you install the motherboard,
study the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
•
Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
•
In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
•
Hold components by the edges and do not touch the ICs.
•
Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
•
When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
Chapter 2 Installation

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ASROCK J4125-ITX and is the answer not in the manual?

ASROCK J4125-ITX Specifications

General IconGeneral
Processor cores4
Processor modelJ4125
Processor socketBGA 1090
Processor manufacturerIntel
Compatible processor series-
Maximum number of SMP processors1
Maximum internal memory supported by processor8 GB
Non-ECCYes
Memory channelsDual-channel
Memory slots typeSO-DIMM
Supported memory typesDDR4-SDRAM
Supported memory clock speeds2133, 2400 MHz
Supported memory module capacities1GB, 4GB
Supported storage drive typesHDD & SSD
Supported storage drive interfacesSATA III
Graphics cardIntel® UHD Graphics 600
OpenGL version4.4
DirectX version12.0
Maximum resolution4096 x 2160 pixels
Number of displays supported3
USB 2.0 connectors2
USB 3.2 Gen 2 (3.1 Gen 2) connectors0
USB connector typeUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Wi-FiNo
LAN controllerRealtek RTL8111H
Ethernet interface typeGigabit Ethernet
Audio chipRealtek ALC892
Cooling typeActive
Component forPC
Power source typeATX
PC health monitoringCPU, FAN, LED, Power supply, Temperature, Voltage
Audio output channels7.1 channels
Motherboard form factormini ITX
Windows operating systems supportedWindows 10 x64
BIOS typeUEFI AMI
ACPI version5.0
BIOS memory size128 Mbit
System Management BIOS (SMBIOS) version3.0
Cables includedSATA
Harmonized System (HS) code84733020
Weight and Dimensions IconWeight and Dimensions
Width170 mm

Related product manuals