Assa Abloy 1584 Series User Manual

IMPORTANT: PLEASE READ BEFORE ATTEMPTING TO
I
NSTALL MAGNETIC LOCK
A. Handle the equipment with care, damaging the mating
s
urface of the magnet or armature plate may reduce locking
efficiency.
B. The magnet mounts rigidly to the door frame. The armature
plate mounts to the door with hardware. The kit provided
allows the armature to pivot about its center to compensate
for door wear and misalignment.
C. Template use must take place with the door
in its normally closed position.
D. Firmly tighten all screws.
ABCDEFGH
8.0 1.75 2.9 .81 1.0 .4 .5 .7
MAGNET DIMENSIONS (INCHES)
ABCDEFGH
203.2 44.45 73.66 20.57 25.4 10.16 12.7 19.05
MAGNET DIMENSIONS (MM)
BLIND NUT
HEADER
DOOR
HEAD
3/8" (US) OR 9.5MM 
(METRIC) HOLE
B
G
H
F
CABLE
D
E
A
C
TAMPER
CAP
GOLD 
W
ASHER
SOCKET CAP SCREW
1/4-20 X 3"
(US VERSION)
6MM-1MM X 75MM
(METRIC VERSION)
Fig. 2 ARMATURE DIMENSIONS AND ASSEMBLY
Important: Armature plate must be able to float
freely. Do not over tighten. The armature
plate will automatically adjust to the
proper position with the magnet.
Fig. 1 STANDARD MAGNET DIMENSIONS
AND ASSEMBLY
A
B
C
D
E
F
F
ABCDEF
6.0 2.75 .5 1.37 3 2.25
152.4 69.9 12.7 34.8 76.2 57.2
ARMATURE DIMENSIONS
(IN.)
(MM)
INSTALLATION INSTRUCTIONS
1584 - 1587 Series Electromagnetic Locks
FOR ASSISTANCE CONTACT SARGENT AT 800-810-WIRE (9473) or www.sargentlock.com
1
A7361A
Copyright © 2009, Sargent Manufacturing Company, an ASSA ABLOY Group
company. All rights reserved. Reproduction in whole or in part without the
express written permission of Sargent Manufacturing Company is prohibited.

Assa Abloy 1584 Series Specifications

General

Brand	Assa Abloy
Model	1584 Series
Category	Door locks
Language	English

Summary

INSTALLATION INSTRUCTIONS 1584 - 1587 Series Electromagnetic Locks

IMPORTANT: PLEASE READ BEFORE INSTALLATION

Crucial pre-installation safety and handling guidelines for magnetic locks to ensure proper function and efficiency.

Fig. 1 STANDARD MAGNET DIMENSIONS AND ASSEMBLY

Provides detailed dimensions for the standard magnet in both inches and millimeters, including an assembly diagram.

Fig. 2 ARMATURE DIMENSIONS AND ASSEMBLY

Details dimensions for the armature plate and assembly instructions, emphasizing free movement for optimal performance.

ARMATURE AND MAGNET MOUNTING

Fig. 3 ARMATURE MOUNTING

Step-by-step guide for mounting the armature plate to the door, including flexible washer usage for pivot function.

Fig. 4 TYPICAL MOUNTING FOR PUSH APPLICATION

Illustrates standard mounting procedures for push applications, including header preparation and blind nut usage.

Fig. 4.1 COLLAPSING THE BLIND NUTS

Detailed procedure for collapsing blind nuts for secure screw mounting in headers, ensuring proper thread engagement.

SPECIALIZED MOUNTING AND DIMENSIONS

Fig. 4.2 TYPICAL MOUNTING FOR PULL APPLICATION WITH Z BRACKET

Describes mounting for pull applications using a Z bracket, often for inswinging doors or physical protection.

Fig. 5 FACE MOUNT MAGNET DIMENSIONS AND ASSEMBLY

Provides dimensions for face-mounted magnets and related assembly components, useful for various door configurations.

DOUBLE DOOR MOUNTING

Guidance for installing electromagnetic locks on double doors, including single-leaf and dual-leaf active door scenarios.

FRAME MOUNTING, WIRING, AND ACCESSORIES

Fig. 6 WOOD FRAME MOUNTING

Instructions for mounting electromagnetic locks in wooden frames, with options for brackets when frame strength is insufficient.

STEEL HEADER FILLED WITH CONCRETE MOUNTING

Methods for mounting in concrete-filled steel headers, including use of specialized brackets and wire management.

Fig. 7 STANDARD WIRING REQUIREMENTS

Specifies voltage, polarity, and power supply requirements for operating the electromagnetic lock correctly.

Fig. 8 ELECTROMAGNETIC LOCKS

Details the lock's dry SPDT output for security reporting and wiring color codes for secure and insecure states.

Fig. 9 USE OF DRESS COVERS

Information on dress covers for enhancing aesthetics, tamper-proofing, and architectural compatibility of the lock.