Assa Abloy SARGENT IN120 User Manual

A8185A
04/16
Copyright 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
Exit Device
Installation Instructions
IN120

Assa Abloy SARGENT IN120 Specifications

General

Brand	Assa Abloy
Model	SARGENT IN120
Category	Door locks
Language	English

Summary

Rim Exit Installation Guide

Install Door Position Switch (DPS)

Instructions for installing the Door Position Switch (DPS) into the door, with notes for wood and metal doors.

Mount Exit Device Chassis

Steps for mounting the exit device chassis to the door, including wire harness routing.

Mount Exit Trim (ET)

Procedure for connecting the motor harness and mounting the Exit Trim (ET) to the exit chassis.

Secure Exit Chassis

Instructions for fully tightening chassis bolts and fastening the chassis to the door.

Outside Reader and Mounting Plate Installation

Steps for orienting, feeding, and installing the outside reader and mounting plate.

Outside Reader Installation (Continued)

Further steps for routing cables and securing the ground lug for the outside reader installation.

Installation of Connectors

Guidance on securing various connectors (DPS, lock body, card reader) to their respective terminals.

Install Inside Component Assembly

Procedure for inserting and snapping the controller into the mounting plate, ensuring connector alignment.

Mortise Exit Installation Guide

Mortise Door Position Switch Installation

Instructions for installing the Door Position Switch (DPS) into the mortise door, with notes for wood and metal doors.

Mount Mortise & Exit Device Chassis

Position Exit Trim (ET)

Secure Exit Chassis (Mortise)

Outside Reader and Mounting Plate Installation (Mortise Exit)

Outside Reader Installation (Continued - Mortise Exit)

Installation of Connectors (Mortise Exit)

Install Inside Module Component Assembly (Mortise Exit)

Operational Check

Final Operational Verification

Procedure for verifying the lock's functionality, including key and credential operation.