Assa Abloy Sargent 7300 Series User Manual

A8270A 02/20
Installation Instructions
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part
without the express written permission ofSARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
WARNING
This product can expose you to lead
which is known to the state of California
to cause cancer and birth defects or other
reproductive harm. For more information
go to www.P65warnings.ca.gov.
Important
The latches, rods, and cassette are pre-installed.
This product must be installed by a factory trained technician.
7300 Series
Multi-Point Lock

Assa Abloy Sargent 7300 Series Specifications

General

Series	7300
Category	Door Locks
Type	Mortise Lock
Material	Steel
Brand	Sargent
Function	classroom, storeroom
Handing	Reversible
Backset	2-3/4 in.
Door Thickness	1-3/4 in. (Standard). Other thicknesses available
Cylinder Type	Mortise cylinder
Construction	Heavy-duty
Compliance	ANSI/BHMA A156.13, UL Listed

Summary

Core Installation Procedures

Door Preparation and Checks

Door Hanging and Top Strike Installation

Center Strike and Retractor Inserts

Uninstalled Latch Verification

Bottom Strike Installation

Latch Adjustment and Clearance

Measures clearance and adjusts latches using worm gears and set screws.

Mortise Lock Installation Steps

Details removing filler and installing the mortise lock with mounting screws.

Key Override and Deadbolt Function Check

Addendum for Pre-Installed Hardware

Addendum: LBC and Rod Guide Installation

Guides LBC installation and installing latch rod guides for proper function.

Addendum: Top Rod Feed and Alignment

Covers feeding the top rod into the door and aligning the rod guide with the LBC gear.

Addendum: Latch Troubleshooting and Rod Check

Addresses latch seating issues, troubleshooting alignment, and rod installation verification.

Addendum: Securing Top Latch and Set Screw

Secures the top latch and tightens the set screw, critical for latch retraction.

Addendum: Bottom Latch and Final Checks

Addendum: Mortise Reinforcer Installation