Assa Abloy ACCENTRA 50 Series - Parallel Arm Installation Procedure

B. Close latch and sweep valves.
C. Install soffit plate and mount closer.
D. Remove arm shoe and install forearm to
plate.
E. Place main arm on closer spindle and rotate
x4
or
x4
or
IMPORTANT
Parallel Arm Installation (Right Hand Shown)
A. Prepare door and frame.
9-1/16
(230)
3/4
(19)
Top of
Door
1-1/2
(38)
3-1/4
(83)
7
(178)
1/2
(13)
1/2
(13)
Hole for 214 Plate
only
4
(102)
7/16
(11)
2-1/8
(54)
2-3/4
(70)
2
(50)
3/8
(10)
Frame
A
C
L
B
C
Door
Opening
Dimension
“A”
Dimension
“B”
Dimension
“C”
to 100° 9-1/4 (235) 7-5/8 (194) 8-5/8 (219)
101° to 130° 7-3/4 (197) 6-1/8 (156) 7-1/8 (181)
*131° to 180° 5-3/4 (146) 4-1/8 (105) 5-1/8 (130)
*Door/Wall/Hardware/Jamb conditions permitting
1st
2nd
Model 51
Regular, Top Jamb, and Parallel Arms, Non-Hold Open
5
Copyright © 2016, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
855-557-5078 x 2 • www.accentra-assaabloy.com
80-9350-2531-010 Rev 3 05/24