6170(F) / 6210
Surface Vertical Rod Exit Device
Installation Instructions
3
80-9460-6005-000 04/24
Copyright © 2015, 2016, 2020, 2023, 2024, ASSA ABLOY ACCENTRA™ Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1-855-557-5078 Ext. 2 • www.accentra-assaabloy.com
1. Verify Parts and Templates
1. Unpack and verify components received using the parts list and exploded views
shown on pages 4 and 5.
2. Read entire instructions before installing this device. Follow all cautions, notes,
and warnings.
3. All dimensions are listed in inches (") and millimeters (mm).
IMPORTANT:
Verifiy device is being installed on the correct door, as well as function,
finish, and size.
y Use site survey to verify correct product ordered.
y Use site survey to verify correct product
y This device is intended to be installed on new 24" (610mm) to 48" (1220mm) metal
or wood, pre-drilled, free swinging.doors only.
Plastic and Paper
Templates are included
Plastic
Template
Paper
Template
Tools Required
Level
1/8"
Hex
Key
Tape
Measure
Pencil
Drill & Bits
Rubber
Mallet
Safety Glasses
Chisel Set Tool Flashlight
Phillips
Head
Tape
To Next Page
Loading...
