How to fix an Assa Abloy Adams Rite 8800 device that will not dog?
If your Assa Abloy Door Opening System device will not dog, first ensure that the push bar is fully depressed. If the issue persists, the dogging assembly might be damaged. Remove and inspect the assembly, and replace it if necessary.
Why is my Assa Abloy Door Opening System device not latching?
There are several reasons why your Assa Abloy Door Opening System device might not be latching. First, ensure the device is not dogged. If it is, undog it following proper procedures. Another potential cause is the closer speed; make appropriate adjustments to the closer. Finally, check the jamb strike alignment. The starwheel must fully engage for complete latching.
What to do if the exterior key will not unlock my Assa Abloy Adams Rite 8800 Door Opening System device?
If the exterior key won't unlock your Assa Abloy Door Opening System device, the rim cylinder tailpiece may not be long enough to fully engage the cylinder actuator. Another possibility is that the cylinder actuator is missing or damaged, in which case you should replace the mounting base.
General| Brand | Assa Abloy |
|---|---|
| Model | Adams Rite 8800 |
| Category | Door Opening System |
| Language | English |
To Next Page