How to troubleshoot a motor that won't start in Assa Abloy Besam SW300 Door Opening System?
If the motor of your Assa Abloy Door Opening System does not start, you can try the following: * Change the setting of the program selector. * Check that there are no objects in the detection zone if a sensor is fitted. * Check the mains switch and fuse in the building.
What to do if Assa Abloy Door Opening System motor starts but the door won't open?
If the motor of your Assa Abloy Door Opening System starts but the door(s) will not open, make sure to unlock the mechanical locks and check that nothing is jammed beneath the door.
Why does my Assa Abloy Besam SW300 open and close continuously?
If your Assa Abloy Door Opening System is fitted with an automatic activation unit and the door opens and closes continuously, ensure that there are no moving objects within 1-1.5 m (39'-59") from the door.
What to do if my Assa Abloy Besam SW300 door does not close?
If the door of your Assa Abloy Door Opening System does not close, you can try the following: * Change the setting of the program selector. * Check that there are no objects in the detection zone if a sensor is fitted. * Ensure that nothing is jammed beneath the door.
What to do if the Assa Abloy Besam SW300 Door Opening System door does not open?
If your Assa Abloy Door Opening System door doesn't open, several factors could be at play. First, ensure the control switch isn't set to OFF; if it is, change the setting. Next, verify that electrical power is present by checking the power switch. If power is available, see if the activation unit is malfunctioning by strapping the impulse inputs. Also, confirm that the presence detection isn't activated by checking the detection zone for obstructions. Finally, check whether KILL is activated and, if so, deactivate it.
Why won't my Assa Abloy Door Opening System door close?
If your Assa Abloy Door Opening System door remains open, there are a few things to check. First, make sure the control switch isn't set to HOLD OPEN; if it is, change it to the OFF/AUTO/OPEN setting. Next, see if the presence impulse is activated due to objects in the detection zone and remove any obstructions. Lastly, check for any obstructions beneath the door and remove them.
What to do if the Assa Abloy Besam SW300 Door Opening System motor starts but the door doesn't open?
If the motor of your Assa Abloy Door Opening System starts but the door doesn't open, consider these possibilities: 1. The mechanical lock might be locked; unlock it. 2. There might be something jammed beneath the door; remove the object. 3. The electric striking plate could be binding; select lock release. 4. The arm system may have come loose; use the tool and the nib to put the door in the required open position, then tighten the arm system. 5. You may need to adjust the striking.
General| Operating Temperature | -20°C to +50°C |
|---|---|
| Power Supply | 230 V AC, 50/60 Hz |
| Safety Features | Obstacle detection |
| Humidity | Max 95% RH (non-condensing) |
| Noise Level | < 60 dB |
| Compliance | EN 16005 |
| Type | Swing Door Operator |
| Control System | Microprocessor-controlled |
Welcomes the user and highlights the product's quality and maintenance needs.
Discusses EMC compliance, potential interference, and user correction methods.
Advises on proper disposal of electronics and batteries in accordance with local regulations.
Defines owner/caretaker responsibilities for correct operation, maintenance, and record-keeping.
Details the warranty period, coverage, exclusions, and limitations for the product.
Recommends regular inspections and service by trained personnel according to regulations.
Describes the Besam SW300/SW150 as a low-energy automatic swing door operator for various applications.
Lists key technical details including manufacturer, power, and approvals.
Lists optional add-ons to enhance the Besam SW300/SW150 functionality.
Details optional add-ons to enhance safety and comfort of the automatic door.
Provides common issues and their remedies for the automatic door system.
Outlines recommended part replacement intervals for preventive maintenance.
Lists additional entrance automation solutions offered by the company.
To Next Page
