How to fix an Assa Abloy Besam SW200i Door Opening System when the motor does not start?
If the motor of your Assa Abloy Door Opening System doesn't start, consider these steps: * Change the setting of the program selector. * If a sensor is installed, check the detection zone for obstructions. * Verify the mains switch and fuse in the building.
Why doesn't my Assa Abloy Besam SW200i Door Opening System door close and how can I fix it?
If your Assa Abloy Door Opening System door doesn't close, try the following: 1. Change the setting of the program selector. 2. If a sensor is fitted, ensure there are no obstructions in the detection zone. 3. Check for any objects jammed beneath the door.
What to do if my Assa Abloy Door Opening System opens and closes continuously?
If your Assa Abloy Door Opening System's door opens and closes continuously, make sure there are no moving objects within 1-1.5 m (39"-59") of the door if an automatic activation unit is installed.
What to do if Assa Abloy Door Opening System motor starts but the door won't open?
If the motor of your Assa Abloy Door Opening System starts but the door(s) won't open: * Unlock any mechanical locks. * Check for obstructions beneath the door.
General| Type | Swing Door Operator |
|---|---|
| Max Door Weight | 250 kg |
| Opening width | Adjustable |
| Hold-open time | Adjustable |
| Operating Temperature | -20°C to +50°C |
| Protection Class | IP20 |
| Operating Modes | Automatic, Manual |
| Safety Features | Obstacle detection |
| Compliance | EN 16005 |
| Control System | Microprocessor controlled |
To Next Page