Assa Abloy Norton 7500 Series User Manual

Copyright © 2019, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9377-3204-020 Rev 1 05/19
7500H
Non Handed Door Closer
Regular Arm
Top Jamb Mount
Parallel Arm
With or without DA sufx (delayed action)
With or without M sufx (metal cover)
Hold Open Arm Models
Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,
est reconnu pour causer le cancer, des anomalies congénitales ou d’autres
problèmes de reproduction. Pour plus d’informations, visitez:
www.P65warnings.ca.gov.
This product can expose you to lead which is known to the state of
California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65warnings.ca.gov.
WARNING
Regular Arm Top Jamb Mount
*Included Components
Parallel Arm
Optional Plates
Legacy Friction Hold Open Arm
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Note: Legacy FHO arm has
installation orientation.
See 80-9300-0003-000 for details.
Tools Needed
TO DETERMINE
HAND OF
YOUR DOOR:
LEFT
HAND
DOOR
RIGHT
HAND
DOOR
Right Hand
Reverse
Left Hand
Reverse
To Determine Your Hand of Door: To Identify Your Model:
Standard 7500 = 4 valves
Delayed Action 7500DA = 5 valves
Older models may
be stamped “1-6”,
“1-4” or “2-6”. They
can be replaced
with a newer “1-6”
model which has
no stamp.
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR

Assa Abloy Norton 7500 Series Specifications

General

Brand	Assa Abloy
Model	Norton 7500 Series
Category	Door Opening System
Language	English

Summary

7500H Regular Arm Installation Guide

Prepare Door and Frame

Details on preparing the door and frame for installation.

Mount Closer to Door

Instructions for mounting the closer unit to the door.

Remove Hold Open Dial

Step to remove the dial from the hold open arm mechanism.

Install Separate Arms

Procedure for installing the closer arms.

Connect Arms and Preload Spring

Steps to connect arms, preload spring, and secure with a set screw.

Set Hold Open Function

Instructions on how to set the hold open feature.

7500H Top Jamb Mount Installation Guide

Prepare Door and Frame for Top Jamb

Steps for preparing the door and frame for top jamb mounting.

Mount Backplate and Closer to Frame

Instructions for mounting the backplate and closer to the frame.

Remove Hold Open Dial for Top Jamb

Step to remove the dial from the hold open arm.

Install Separate Arms for Top Jamb

Procedure for installing the closer arms.

Connect Arms and Set Top Jamb Spring

Connect arms, preload spring, and tighten set screw.

Set Hold Open for Top Jamb Mount

Instructions for setting the hold open feature.

7500H Parallel Arm Installation Guide

Prepare Door and Frame for Parallel Arm

Steps for preparing the door and frame for parallel arm mounting.

Remove Hold Open Dial for Parallel Arm

Step to remove the dial from the hold open arm.

Install Soffit Plate and Mount Closer

Instructions for installing the soffit plate and closer.

Install Hold Open Arm to Plate

Procedure for installing the hold open arm onto the plate.

Place Main Arm on Closer Spindle

How to place the main arm onto the closer spindle.

Connect Arms, Preload and Tighten Set Screw

Connecting arms, preloading spring, and tightening set screw.

Set Hold Open for Parallel Arm

Instructions for setting the hold open feature.