EasyManuals Logo

Assa Abloy Norton SafeZone 7100SZ Series User Manual

Assa Abloy Norton SafeZone 7100SZ Series
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
80-9371-0085-020 (01-14)
ASSA ABLOY
1
ASSA ABLOY
Requirements:
Units are handed. Hand of unit and hand of door must be the same.
All dimensions shown in inches (mm).
Door must be hung on ball bearing butt hinges or ¾” (19) offset pivots.
Door thickness must be 1-3/4" (44) to 2-1/4" (64).
Door must swing freely through the entire opening and closing cycle before beginning the installation procedure.
Frame face must be a minimum of 2" (51).
Ceiling clearance must be a minimum of 3 -1/2" (89) for push side application or 4” (102) for pull side application. See pages
3 and 7 for templates.
Power input to unit must be of the same voltage as that stated on the unit.
Unit to be mounted on interior of building in dry environment, maximum humidity of 95%.
See NFPA70 for wiring requirements and NFPA72 for alarm system requirements.
Pull Side Applications with Slide Track
(7110SZS, 7150SZS)
(see page 7 for template)
Patent Pending
Push Side Applications with Double Lever Arms
(7120SZS, 7130SZS)
(see page 3 for template)
Item No. Description
1 Track (Pull Side)
2 Cover
3 Track Arm (Pull Side)
4 Double Lever Arm (Push Side)
• Allen wrench set (inch)
• Flat blade screwdriver (potentiometer & terminal size)
• Screwdriver (Phillips size 2)
Tape rule
• Power drill
• Center punch
Wire stripper
Tools required:
Use screw pack and hardware provided to mount operator.
Table of Contents:
General Information...................2
Push Side Template...................3
Push Side Installation..............3-5
Closer Adjustments...................6
Pull Side Template.....................7
Pull Side Installation.................7-9
Closer Adjustments...................10
Electrical Connections...............11
Selective Hold Open..................12
Sensor Info and Set-up.........13-14
Troubleshooting.........................14
3
1
2
4
®
7100SZ Series SafeZone
With Selective Hold Open Option
Installation and Instruction Manual

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Assa Abloy Norton SafeZone 7100SZ Series and is the answer not in the manual?

Assa Abloy Norton SafeZone 7100SZ Series Specifications

General IconGeneral
BrandAssa Abloy
ModelNorton SafeZone 7100SZ Series
CategoryDoor Opening System
LanguageEnglish

Related product manuals