Assa Abloy Alarm Controls KP-400 - Basic Wiring Diagram

9
12 OR 24V
AC OR DC
POWER
SUPPLY
AC POWER CAN ONLY
BE USED WITH
AC POWERED
ELECTRIC STRIKES
MAGNETIC LOCK
OR
ELECTRIC STRIKE
MODEL TS-2
REQUEST TO
EXIT STATION
(OPTIONAL)
USE N/O CONTACTS
Use N/C contact for magnetic locks and fail-safe
electric strikes.
Use N/O contact for fail-secure electric strikes.
The 1N4004 Diode must be used for DC powered
electric strike applications.
12 OR 24V
AC OR DC
POWER
SUPPLY
AC POWER CAN ONLY
BE USED WITH
AC POWERED
ELECTRIC STRIKES
MAGNETIC LOCK
OR
ELECTRIC STRIKE
MODEL TS-2
REQUEST TO
EXIT STATION
(OPTIONAL)
USE N/O CONTACTS
Output 2 is used to control access of Output 1 users. Output 2 must be
in Latching Mode. Activating Output 2 will lock out Output 1 users.
Use N/C contact for magnetic locks and fail-safe electric strikes.
Use N/O contact for fail-secure electric strikes.
The 1N4004 Diode must be used for DC powered electric strike
applications.
Warning!
Be careful not to lock people inside!
BASIC WIRING DIAGRAM
DOOR LOCK INHIBIT WIRING DIAGRAM