56
EN
Maintenance, accessories, warranty, disposal
Maintenance
The escape door locking system 352M is maintenance-free. Lubricant should be
applied to the sliding surfaces on the lock counterpart on a regular basis.
You must comply with the cycles for a regular function check specified by the
manufacturer during use as an electric locking system on doors along escape
routes. You will find details in the escape door control system instructions.
Accessories
Mounting plate SETLA M5
The mounting plate SETLA M5 described in the chapter “Mounting”, page39
is not included in the scope of delivery of the escape door locking system 352M
and can be ordered separately:
effeff – mounting plate SETLA M5 SETLA M5
Screw-on casing A10
The screw-on casing described in the Chapter “Mounting on the door frame
with screw-on casing”, page 46 is not included in the scope of supply of the
escape door locking system 352M and can be ordered separately:
effeff – screw-on casing A10 A1035-01
Maintenance, accessories, warranty, disposal
To Next Page
Loading...
