Commissioning GSM-WiFi U - SecureWatch Mode
So far we have dealt with commissioning a standalone system. In this section we
will look at commissioning using a SecureWatch panel.
You will need to go to your
And if you want to control the system via the HKC APP then you will need to set it
up as per page 8.
However, one advantage of connecting the unit to a SecureWatch panel is that the
communicator can be commissioned through the panel’s engineering menu
structure. You can not use the SmartLink700 app for this task.
Wire the GSM-WiFiU communicator to the SecureWatch panel as illustrated in the
next page.
internet browser and type securecomm.hkc.ie as before
to setup the SecureComm billing arrangements - see page 3.
11
To Next Page
Loading...
Need help?
General