Associated Research HypotULTRA 7850 Quick Start Guide

SAFETY CHECKLIST
Quick Start Guide
HypotULTRA
®
for the following models: 7800, 7820, 7850
EN 61010-1
EN 61010-31
WARNING: THIS GUIDE WAS CREATED FOR OPERATORS HAVING SOME FAMILIARITY WITH ELECTRICAL
SAFETY TESTING. AN ELECTRICAL SAFETY TESTER PRODUCES VOLTAGES AND CURRENTS THAT CAN
CAUSE HARMFUL OR FATAL ELECTRIC SHOCK. TO PREVENT ACCIDENTAL INJURY OR DEATH, THESE
SAFETY PROCEDURES MUST BE STRICTLY OBSERVED WHEN HANDLING AND USING A TEST INSTRUMENT.
CONTACT US AT INFO@ARISAFETY.COM FOR MORE INFO ON HOW TO GET TRAINED ON ELECTRICAL
SAFETY TESTING.
Survey the test station. Make sure it is safe & orderly.
Always keep unqualied/unauthorized personnel away from the test area.
Familiarize yourself with safety protocols in the event of a problem.
Exercise caution and never touch products or connections during a test.
Train operators. Never touch clips directly & always connect the return lead rst.
You should always know when a test is being performed.

Associated Research HypotULTRA 7850 Specifications

General

Type	Hipot Tester
Frequency Range	50/60 Hz
Display	LCD
Arc Detection	Yes
Safety Standards	UL, CSA, CE
Power Supply	100-240 V AC, 50/60 Hz
AC Hipot Voltage	0 to 5 kV AC
DC Hipot Voltage	0 to 6 kV DC
Insulation Resistance	0.1 MΩ to 50 GΩ
Ground Bond Current	40 A
Voltage Range	0 to 5 kV AC, 0 to 6 kV DC
Resistance Range	0.1 MΩ to 50 GΩ
Ramp Time	0.1 to 999.9 seconds
Interface	RS-232, Ethernet, USB