Astralpool 78540 - Page 17

4. USAGE AND OPERATION
16
4.2.4 Setting temperature
In the main interface press or and the current mode target-temperature
flashes, then press to increase the temp.value, or press to decrease it.
Press MODE can save setting parameter and back to the main interface
Press can not save setting parameter but back to the main interface
Attention If there is no operation for 5s system would remember parameter setting and back to
the main interface.
Running interface
Cooling set
Cooling set
Press
/
AUTO
or
/
AUTO
System will save user's
setting and return back to
main interface ifthere is no
operation on buttons in
5s.
Press
Press
Press MODE
Save parameter
/
/
AUTO
AUTO