Astralpool 78540 - Page 22

4. USAGE AND OPERATION
[Type here]
4.2.8 Malfunction display
There will be malfunction code showing on the controller screen when relative malfunction occurs.
You can refer to the malfunction table to find out the failure cause and solution. For
example
Water inlet temp. Sensor failure
4.3. Parameter table
Code
Meaning
Default
Remarks
r01
Set-point of cooling target temp.
27
Ajustable
r02
Set-point of heating target temp.
27
Ajustable
r03
Set-point of auto mode target temp.
27
Ajustable
/
AUTO